Brands We Carry
Downtime is the sworn enemy of every painter and contractor. A single worn seal or missing gasket can stall an entire project—and when you’re billing by the hour, that matters. That’s why Benny’s Spray Center keeps shelves stocked with genuine DeVilbiss replacement parts and ships fast from our Stockton warehouse. Below are three small but mighty items you’ll find right now in our DeVilbiss aisle—and why every Central Valley pro (or serious DIYer) should keep them in the tool trailer.
1. Tank Lid Gasket, 2-½ Gallon — Stratoprene (OEM QMS-80-1)
DEVILBISS Tank Lid Gasket, 2-1/2 Gallon, Stratoprene OEM Part Number: QMS-80-1
DEVILBISS Description: Tank Lid Gasket, 2-1/2 Gallon, Stratoprene Weight: 0.2696 OEM Part Number: QMS-80-1 Bedford Part Number: 56-95 CA PROP
If you run a pressure-fed pot, that tank lid gasket is the first line of defense against pressure loss, solvent fumes, and product spills. DeVilbiss builds theirs from Stratoprene, a rugged elastomer formulated to stay flexible when solvents and heat would turn ordinary rubber brittle. Swapping in a fresh gasket like the QMS-80-1 $36.29 stops micro-leaks that rob you of atomization pressure and wreck your finish. Keep one in your parts bin and you’ll never be caught scrambling for a roll of tape to “make it work.”
2. O-Rings Kit (25-pack) — OEM SSG-8069-K25
DEVILBISS O-Rings (Kit of 25) OEM Part Number: SSG-8069-K25
DEVILBISS Description: O-Rings (Kit of 25) Weight: 0.0088 OEM Part Number: SSG-8069-K25 Bedford Part Number: 55-2358 CA PROP 65: NO
Spray guns, regulators, and pumps are packed with tiny O-rings that seal fluid passages and air passages alike. Lose or nick even one and you’ll see drips, sputters, or sudden pressure drops. DeVilbiss bundles 25 of the most commonly replaced sizes into the SSG-8069-K25 kit—ideal for shop managers who’d rather grab an identical ring than guess at hardware-store sizing. At $17.20 for twenty-five pieces, it’s cheap insurance against a ruined clear-coat or a day wasted troubleshooting mystery leaks.
3. ASME Air-Relief Safety Valve — 80 PSI (OEM TIA-5080)
DEVILBISS ASME Air Relief Safety Valve – 80 PSI OEM Part Number: TIA-5080
DEVILBISS Description: ASME Air Relief Safety Valve – 80 PSI Weight: 0.0930 OEM Part Number: TIA-5080 Bedford Part Number: 29-1676
Pressure-pot systems rely on spring-loaded safety valves to vent excess pressure long before a dangerous rupture can occur. Springs fatigue and corrode over time, skewing the “pop-off” threshold—so replacing the valve on schedule is critical. The DeVilbiss TIA-5080 is factory-calibrated to open at 80 PSI, meeting ASME code and protecting both equipment and crew. At just $17.13, it’s a small part that prevents catastrophic failures and OSHA headaches. Benny’s Spray Center
Why Genuine Parts Matter
It can be tempting to grab off-brand seals or “universal” valves, but mismatched materials swell, crack, or deform under solvent load and compressed-air cycles. DeVilbiss engineers specify exact durometers, thread tolerances, and spring constants so every component works as a system—maintaining consistent spray patterns, transfer efficiency, and operator safety. Using OEM parts also preserves your equipment warranty and resale value.
Fast Local Support Since 1988
Benny’s Spray Center has served Stockton, Lodi, and the wider Central Valley for over 35 years with one mission: keep painters spraying. Our counter crew can cross-reference part numbers on the spot, and our certified techs handle in-house repairs if you’re short on time. Need these parts shipped to your job-site tomorrow? Order online 24/7 at bennysspraycenter.com or call (209) 464-1596—we’ll have the gasket, O-rings, or safety valve on the truck before the paint dries on today’s project.
Bottom line: a $20 gasket, a bag of O-rings, or a fresh safety valve can save you thousands in lost labor and wasted coating. Stock up now, stay productive, and let Benny’s keep your DeVilbiss gear running like it just came out of the box.